--- a/doc/Makefile.am	Tue Jan 27 05:37:26 2009 +0000
+++ b/doc/Makefile.am	Tue Jan 27 05:41:23 2009 +0000
@@ -1,3 +1,3 @@
-EXTRA_DIST = lwasm.txt internals.txt pseudo\ ops.txt object\ files.txt
+EXTRA_DIST = lwasm.txt internals.txt pseudoops.txt objectfiles.txt
 
 

--- a/doc/object files.txt	Tue Jan 27 05:37:26 2009 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,79 +0,0 @@
-An object file consists of a series of sections each of which contains a
-list of exported symbols, a list of incomplete references, and a list of
-"local" symbols which may be used in calculating incomplete references. Each
-section will obviously also contain the object code.
-
-Exported symbols must be completely resolved to an address within the
-section it is exported from.
-
-Each object file starts with a magic number and version number. The magic
-number is the string "LWOBJ16" for this 16 bit object file format. The only
-defined version number is currently 0. Thus, the first 8 bytes of the object
-file are:
-
-4C574F424A313600
-
-Each section has the following items in order:
-
-* section name
-* flags
-* list of local symbols (and addresses within the section)
-* list of exported symbols (and addresses within the section)
-* list of incomplete references along with the expressions to calculate them
-* the actual object code
-
-The section starts with the name of the section with a NUL termination
-followed by a series of flag bytes terminated by NUL. The following flag
-bytes are defined:
-
-Byte	Meaning
-00		no more flags
-01		section is BSS - no actual code is present
-
-Either a NULL section name or end of file indicate the presence of no more
-sections.
-
-Each entry in the exported and local symbols table consists of the symbol
-(NUL terminated) followed by two bytes which contain the value in big endian
-order. The end of a symbol table is indicated by a NULL symbol name.
-
-Each entry in the incomplete references table consists of an expression
-followed by a 16 bit offset where the reference goes. Expressions are
-defined as a series of terms up to an "end of expression" term. Each term
-consists of a single byte which identifies the type of term (see below)
-followed by any data required by the term. Then end of the list is flagged
-by a NULL expression (only an end of expression term).
-
-TERMTYPE	Meaning
-00			end of expression
-01			integer (16 bit in big endian order follows)
-02			external symbol reference (NUL term symbol)
-03			local symbol reference (NUL term symbol)
-04			operator (1 byte operator number - see below)
-05			section base address reference
-
-External references are resolved using other object files while local
-references are resolved using the local symbol table(s) from this file. This
-allows local symbols that are not exported to have the same names as
-exported symbols or external references.
-
-The operator numbers are:
-
-NUM	OP
-01	+ (plus)
-02	- (minus)
-03	* (times)
-04	/ (divide)
-05	% (modulus)
-06	\ (integer division)
-07	bitwise and
-08	bitwise or
-09	bitwise xor
-0A	boolean and
-0B	boolean or
-0C	- (unary negation, 2's complement)
-0D	^ (unary 1's complement)
-
-An expression is represented in a postfix manner with both operands for
-binary operators preceding the operator and the single operand for unary
-operators preceding the operator.

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/doc/objectfiles.txt	Tue Jan 27 05:41:23 2009 +0000
@@ -0,0 +1,79 @@
+An object file consists of a series of sections each of which contains a
+list of exported symbols, a list of incomplete references, and a list of
+"local" symbols which may be used in calculating incomplete references. Each
+section will obviously also contain the object code.
+
+Exported symbols must be completely resolved to an address within the
+section it is exported from.
+
+Each object file starts with a magic number and version number. The magic
+number is the string "LWOBJ16" for this 16 bit object file format. The only
+defined version number is currently 0. Thus, the first 8 bytes of the object
+file are:
+
+4C574F424A313600
+
+Each section has the following items in order:
+
+* section name
+* flags
+* list of local symbols (and addresses within the section)
+* list of exported symbols (and addresses within the section)
+* list of incomplete references along with the expressions to calculate them
+* the actual object code
+
+The section starts with the name of the section with a NUL termination
+followed by a series of flag bytes terminated by NUL. The following flag
+bytes are defined:
+
+Byte	Meaning
+00		no more flags
+01		section is BSS - no actual code is present
+
+Either a NULL section name or end of file indicate the presence of no more
+sections.
+
+Each entry in the exported and local symbols table consists of the symbol
+(NUL terminated) followed by two bytes which contain the value in big endian
+order. The end of a symbol table is indicated by a NULL symbol name.
+
+Each entry in the incomplete references table consists of an expression
+followed by a 16 bit offset where the reference goes. Expressions are
+defined as a series of terms up to an "end of expression" term. Each term
+consists of a single byte which identifies the type of term (see below)
+followed by any data required by the term. Then end of the list is flagged
+by a NULL expression (only an end of expression term).
+
+TERMTYPE	Meaning
+00			end of expression
+01			integer (16 bit in big endian order follows)
+02			external symbol reference (NUL term symbol)
+03			local symbol reference (NUL term symbol)
+04			operator (1 byte operator number - see below)
+05			section base address reference
+
+External references are resolved using other object files while local
+references are resolved using the local symbol table(s) from this file. This
+allows local symbols that are not exported to have the same names as
+exported symbols or external references.
+
+The operator numbers are:
+
+NUM	OP
+01	+ (plus)
+02	- (minus)
+03	* (times)
+04	/ (divide)
+05	% (modulus)
+06	\ (integer division)
+07	bitwise and
+08	bitwise or
+09	bitwise xor
+0A	boolean and
+0B	boolean or
+0C	- (unary negation, 2's complement)
+0D	^ (unary 1's complement)
+
+An expression is represented in a postfix manner with both operands for
+binary operators preceding the operator and the single operand for unary
+operators preceding the operator.

--- a/doc/pseudo ops.txt	Tue Jan 27 05:37:26 2009 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,51 +0,0 @@
-The following pseudo operations are understood by LWASM.
-
-SECTION <name>
-
-This introduces a section called <name>. This is only valid if assembling to
-an object file. Only one section can be open at any given time. Sections
-may be ended with ENDSECTION. Only one section can be open at any given
-time. A subsequent SECTION directive will end the previous section. It is
-important to note that an end of file does not close the currently open
-section. There cannot be a symbol on a SECTION line.
-
-ENDSECTION
-
-Specifies the end of a section. This is optional. There cannot be a symbol
-on an ENDSECTION line.
-
-ORG <addr>
-
-Specifies the assembly address. For the raw target, this is advisory and
-only affects the addresses of symbols. For the object file target, this can
-only appear outside of all sections. For the DECB target, each ORG statement
-after which any output is generated will generate a segment in the output
-file. <addr> must be completely resolved during pass 1 of the assembly
-process and thus may not refer to forward references or external symbols, or
-other symbols that refer to such.
-
-<symbol> EQU <value>
-
-Makes <symbol> equivalent to <value>. <value> may be an external reference
-in which case any references to <symbol> will also be external references.
-
-EXPORT <symbol>[ as <name>]
-
-Marks previously defined <symbol> for export. If <name> is specified, it
-will be exported as <name>. <symbol> must not be an external reference and
-must be defined before EXPORT.
-
-EXTERN <symbol>[ as <name>]
-IMPORT <symbol>[ as <name>]
-
-Marks <symbol> as an external reference. If <name> is specified, <name> is
-the local name the symbol is references as in this assembly file while
-<symbol> is the actual symbol to be referenced externally.
-
-END [<addr>]
-
-Marks the end of the assembly process. Immediately terminates assembly
-without processing any other lines in this file or any others. It is
-optional. <addr> is only allowed for the DECB target in which case it
-specifies the execution address. If it is not specified, the address
-defaults to 0.

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/doc/pseudoops.txt	Tue Jan 27 05:41:23 2009 +0000
@@ -0,0 +1,51 @@
+The following pseudo operations are understood by LWASM.
+
+SECTION <name>
+
+This introduces a section called <name>. This is only valid if assembling to
+an object file. Only one section can be open at any given time. Sections
+may be ended with ENDSECTION. Only one section can be open at any given
+time. A subsequent SECTION directive will end the previous section. It is
+important to note that an end of file does not close the currently open
+section. There cannot be a symbol on a SECTION line.
+
+ENDSECTION
+
+Specifies the end of a section. This is optional. There cannot be a symbol
+on an ENDSECTION line.
+
+ORG <addr>
+
+Specifies the assembly address. For the raw target, this is advisory and
+only affects the addresses of symbols. For the object file target, this can
+only appear outside of all sections. For the DECB target, each ORG statement
+after which any output is generated will generate a segment in the output
+file. <addr> must be completely resolved during pass 1 of the assembly
+process and thus may not refer to forward references or external symbols, or
+other symbols that refer to such.
+
+<symbol> EQU <value>
+
+Makes <symbol> equivalent to <value>. <value> may be an external reference
+in which case any references to <symbol> will also be external references.
+
+EXPORT <symbol>[ as <name>]
+
+Marks previously defined <symbol> for export. If <name> is specified, it
+will be exported as <name>. <symbol> must not be an external reference and
+must be defined before EXPORT.
+
+EXTERN <symbol>[ as <name>]
+IMPORT <symbol>[ as <name>]
+
+Marks <symbol> as an external reference. If <name> is specified, <name> is
+the local name the symbol is references as in this assembly file while
+<symbol> is the actual symbol to be referenced externally.
+
+END [<addr>]
+
+Marks the end of the assembly process. Immediately terminates assembly
+without processing any other lines in this file or any others. It is
+optional. <addr> is only allowed for the DECB target in which case it
+specifies the execution address. If it is not specified, the address
+defaults to 0.